2018 F150 climate control wiring?
#1
2018 F150 climate control wiring?
Hello All,
FNG here, with a newly purchased 2018 F150. over the weekend I went to install a new radio along with the idatalink maestro canbus. I couldn't get it working right in time so I opted to put the OEM climate and radio controls back. Now, the climate control radio controls don't work. I've checked Fuse 12 and 13 and it looks fine. I'd like to check to see if there's power to the wiring harness to completely eliminate that as an issue but can find out whats power and whats ground. I'd like to think I didn't screw up the control boards themselves but never say never.
Apologies if this was covered in a old thread, It's close to 100 degrees, I have a new truck, and no AC. help?
FNG here, with a newly purchased 2018 F150. over the weekend I went to install a new radio along with the idatalink maestro canbus. I couldn't get it working right in time so I opted to put the OEM climate and radio controls back. Now, the climate control radio controls don't work. I've checked Fuse 12 and 13 and it looks fine. I'd like to check to see if there's power to the wiring harness to completely eliminate that as an issue but can find out whats power and whats ground. I'd like to think I didn't screw up the control boards themselves but never say never.
Apologies if this was covered in a old thread, It's close to 100 degrees, I have a new truck, and no AC. help?
#2
Senior Member
Disconnect the battery for a good 10-15 mins and hopefully it will reset. These radios are pretty integrated into the truck and its not a simple remove/replace with aftermarket headunits. Which stock unit do you have? The 4" or 8" Sync unit?
#3
Do you remember what ended up being the problem? Having the same issue