Ford F150 Forum - Community of Ford Truck Fans

Topic Sponsor
2015 - 2020 Ford F150 General discussion on the 13th generation Ford F150 truck.
Sponsored by:
Sponsored by: Worksport

2018: Adding Adaptive Cruise Control

Thread Tools
 
Search this Thread
 
Old Mar 25, 2019 | 11:15 PM
Share
  #81  
Ruby 2018's Avatar
Ruby 2018
Junior Member
 
Joined: Jan 2019
Posts: 13
Likes: 9
Default
Originally Posted by P51SVO
How long did it take to calibrate the CCM? And did you get a process completed while you are calibrating it?
It took about a half an hour. The fastest way to get it calibrated is to follow another vehicle about 100-150 feet back. It also helps to drive on a road that has lots of guard rails, signs and such. Once its calibrated, the sensor not aligned message goes away.


Originally Posted by Livnitup
There are no as-built values in TCM/PCM related to ACC stop&go anyways.
Yea I thought that there was since I was getting codes in the TCM/PCM when changing the BCM value. Turns out I missed a value in the BCM.
Reply
0
Old Mar 26, 2019 | 07:09 AM
Share
  #82  
Iggy F-150's Avatar
Iggy F-150
5 Year Member
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Nov 2013
Posts: 315
Likes: 89
From: Western PA
Default
Originally Posted by P51SVO
This the p/n of the IPMA that got - H1BZ-9E731-AE.
I believe the correct part number should be JL3T-19H406-CE.
Reply
0
Old Mar 26, 2019 | 07:18 AM
Share
  #83  
Iggy F-150's Avatar
Iggy F-150
5 Year Member
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Nov 2013
Posts: 315
Likes: 89
From: Western PA
Default
Originally Posted by Ruby 2018
Update: Nothings different in the PCM/TCM. The reason I was getting codes in the PCM/TCM when changing 726-13-01 was because I wasn't changing the number before it. 726-13-01 XX90-6XXX-XXX is for ACC with Stop and go. As for the ABS issue, I looked at the Forscan spreadsheet and my factory value, 760-03-01 3XXX-XX, has ACC and CMbB enabled. so it should work without changing it. The only issue now is when I change the BCM value, normal cruise wont work and I get 2 IPMA codes. I think normal cruise will not work because of the IPMA codes. So I'm going to order the IPMA tomorrow and go from there.
So are you saying that your truck at 726-13-01 is XX90-6XXX-XXXX from the factory? What was the entire value you entered for 726-13-01? My as-built for that is 4088-2085-00AE.
Reply
0
Old Mar 26, 2019 | 07:23 AM
Share
  #84  
Iggy F-150's Avatar
Iggy F-150
5 Year Member
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Nov 2013
Posts: 315
Likes: 89
From: Western PA
Default
Originally Posted by Ruby 2018
If you have a early production 2018, the TCM is part of the PCM. I have a late production but I wouldn't change any of the PCM/TCM values as they change depending on the module calibration.

I ordered the IPMA today and it should be here tomorrow. The p/n has superseded, Ill post the new p/n when I get it. Hopefully once I get it installed and calibrated, ACC will work.
Where did you order your IPMA from, what part number (JL3T-19H406-CE?), and what did it cost if you don't mind me asking?
Reply
0
Old Mar 26, 2019 | 05:25 PM
Share
  #85  
Iggy F-150's Avatar
Iggy F-150
5 Year Member
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Nov 2013
Posts: 315
Likes: 89
From: Western PA
Default
Originally Posted by P51SVO
This the p/n of the IPMA that got - H1BZ-9E731-AE.
I sent the VIN that Livinitup sent to me (1FTEW1EG8JFA62972) to my dealer and he came back with a JL3Z-19G490-K for the IPMA?
Reply
0
Old Mar 26, 2019 | 10:46 PM
Share
  #86  
Ruby 2018's Avatar
Ruby 2018
Junior Member
 
Joined: Jan 2019
Posts: 13
Likes: 9
Default
Originally Posted by Iggy F-150
So are you saying that your truck at 726-13-01 is XX90-6XXX-XXXX from the factory? What was the entire value you entered for 726-13-01? My as-built for that is 4088-2085-00AE.
My As-built is the same as yours. The trucks that come fronm the factory with ACC have 4090-6085-00XX.

Originally Posted by Iggy F-150
I sent the VIN that Livinitup sent to me (1FTEW1EG8JFA62972) to my dealer and he came back with a JL3Z-19G490-K for the IPMA?
That is the correct p/n. ($585 CND) Its actually the same IPMA from the 2019s. There's way more as-built values. I got it installed and calibrated but no such luck. I'm thinking your right about the ABS module being different. I get a ABS code saying invalid configuration and a IPMA code saying invalid data received from ABS. I still cant get normal cruise to work when changing 726-13-01 to XX90-6XXX-XXXX. When I'm following another vehicle, there's a little car that shows up where the cruise control speed is. so all the modules are receiving the data, I just cant get ACC to work.
Last edited by Ruby 2018; Mar 26, 2019 at 11:54 PM.
Reply
0
Old Mar 27, 2019 | 07:07 AM
Share
  #87  
Iggy F-150's Avatar
Iggy F-150
5 Year Member
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Nov 2013
Posts: 315
Likes: 89
From: Western PA
Default
Originally Posted by Ruby 2018
My As-built is the same as yours. The trucks that come fronm the factory with ACC have 4090-6085-00XX.


That is the correct p/n. ($585 CND) Its actually the same IPMA from the 2019s. There's way more as-built values. I got it installed and calibrated but no such luck. I'm thinking your right about the ABS module being different. I get a ABS code saying invalid configuration and a IPMA code saying invalid data received from ABS. I still cant get normal cruise to work when changing 726-13-01 to XX90-6XXX-XXXX. When I'm following another vehicle, there's a little car that shows up where the cruise control speed is. so all the modules are receiving the data, I just cant get ACC to work.
Crap, something else to buy now! There are two different parts for the ABS that need to be replaced, the ABS module and the ABS valve body.
Reply
0
Old Mar 27, 2019 | 07:19 AM
Share
  #88  
Iggy F-150's Avatar
Iggy F-150
5 Year Member
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Nov 2013
Posts: 315
Likes: 89
From: Western PA
Default
Reply
1
Old Mar 27, 2019 | 10:33 AM
Share
  #89  
Ragingun's Avatar
Ragingun
Senior Member
 
Joined: Mar 2019
Posts: 126
Likes: 28
From: WI
Default
Early on in this thread it was posted it costs roughly $500 to do this mod. By looking and ready through this there is a bit of confusion. Does this mod require the 8" cluster? If so the cheapest I found was $1200 for that alone. Even the parts lists I've seen in this thread are well above the $500 range.
Reply
0
Old Mar 27, 2019 | 10:50 AM
Share
  #90  
OCMike's Avatar
OCMike
TOTM Sept. '18
5 Year Member
Liked
Loved
Community Favorite
iTrader: (1)
 
Joined: Nov 2017
Posts: 4,171
Likes: 3,083
From: Osceola, Indiana
Default
Originally Posted by Ragingun
Early on in this thread it was posted it costs roughly $500 to do this mod. By looking and ready through this there is a bit of confusion. Does this mod require the 8" cluster? If so the cheapest I found was $1200 for that alone. Even the parts lists I've seen in this thread are well above the $500 range.
Yes I think a 8" display would be required but I think the going rate with top notch customer service is in the $600-700 range, Livinitup is the goto guy. It's the very first mod I did to my truck, and don't regret it for a millisecond.

https://www.f150forum.com/f122/2015-...usters-400378/

https://www.clustersbylivnitup.com/

Mike
Last edited by OCMike; Mar 27, 2019 at 10:55 AM.
Reply
2



Advanced Search

All times are GMT -4. The time now is 02:53 AM.