Yeah, I came up empty in my search also.

I know it's been done in a Fusion, this guy retrofitted Stop&Go from a 2019 Fusion into his 2014. .... I was just wondering since the Fusion and F150 share some similarities in their asbuilt programming.

 

Puh,

How long did you usually take to get all of this installed and setup?
I have a Lariat without camera and so on,
does these wiring harnes do provide what I need?
Bumper Harness
JL3Z-15K867-K
and
CADS Harness
JL3Z-15K867-B

?

Thanks

 

If you do not have a camera, you will possibly need a new windshield and to run some wires to/from the camera. I think you can find details earlier in this thread and in the 2019+ thread. It is quite a bit more complicated but several users here have completed it. I don't have experience with that myself, though.

 

yes currently looking into the option either to drop the whole ACC project or get the parts to mount the camera on the windshield. (Would have to get rid of the black shaded area above the mirror) i cannot replace the windshield here in Germany. Way too expensive.

the windshield bracket would be

FL3Z-14D696-C

but i am not sure.

 

No, this is not the bracket. It is a plastic piece, you can in some earlier photos in this thread or the 2019 thread that show the IMPA module. I would not expect it to be available separately because it comes bonded to the windshield glass (I think).
It is not shown separately on this diagram: https://parts.lakelandford.com/a/For...S/MA15425.html

Based on the photos the part number you provided is the flex heater for the auto wiper IR sensor. Although I do see the description on some sites says heater and some say sun load. I think the sun load description is a mistake.

 

Finally tried nano to do abs module swap. Thanks everyone for the help!

 

Hey so I have a 2018 POwerstroke Lariat and I just enabled LKA on the truck and I would like to add ACC any chance you have the parts and forscan programming you did to get it to work in your truck??

 

I would start by reading the excellent writeup @mbrick created. It is located at post #406 in this thread. Good luck!

 

I have although it's a little confusing since of course it doesn't relate exactly to my truck. I trying to determine since I have enabled LKA in my truck whether or not it has the modules (except the CAD) to be enabled via forscan. I saw a site, which I can not find again, that sold the parts and forscan programming to install it on the truck but the price was $1499 which seemed high if it only included the CAD module ($400), steering column switch (~$60) wiring harness, etc. They seemed to indicate that based on my VIN my IPMA and ABC modules already ACC capable. They don't sell the HUD parts as these are "just flashing lights" and that you will get warnings in the IPC display. If all that's true seems to me you should be able to get the parts (- HUD, ABS and IPMA) for well under $1000.

 

Could you elaborate why you don't think it relates to your truck? Do you have a 500a, 501a, or 502a?
You'll need a new ABS module. Also need a new IMPA camera/module.
The parts you need should match the list I provided since @NMMI82 and I both have 502a with factory LKA.

If you have a non 502a Lariat I think you should verify the correct wires are present at the bumper for the CCM (radar module) harness. It's been a while, I don't recall if that is XLT to Lariat or within Lariat trims.