Did anyone have any luck finding out if the JL3Z-2C219-C part number will work for the module only? Build date after, Feb. 2018 if it matters.

Read the entire thread and wasn't able to confirm. Btw, big thanks to all the hero’s who did the ground work for getting this working.

 

Good evening, does anyone know of an installer who can install the ACC in a 2018 in Arizona?? I was looking through the threads and this is way past my technical skills.

 

I am very sure that depends on your vehicle, for example which trim level? Lariot or higher is better... And do you have the lane keeping assistance already this makes it alot easier.

 

I have an XLT without the lane assistance.

 

That's what I have and honestly I don't know that anyone has done it. I plan on it but it requires replacing the windshield first.

 

I have a 2018 xlt ecoboost that I have already added the 8 inch nav and also the 8 inch gauge cluster. i would like to add the ACC and possibly the lane assist.I am not sure which version xlt that I have (302a). How is that determined? Has anyone added this on a 2018 xlt and if so would you have a parts list. Does the windshield have to be changed for ACC or just lane assist ? If anyone has more info on this can you chime in
Thanks Mitch

 

Can the ACC be added to a 2020 801A Raptor? I had a 2020 Lariat 501A and I performed the upgrade thanks to this thread. Then I upgraded to a 2018 502A but it seemed the same stuff didn't apply anymore for the adaptive cruise due to the stop and go. However, since the Raptor still has different components, I wonder if I can do it with this route or do I have to do the ACC with Stop and Go ? 801A comes with LKA std I believe...

Thanks!

 

......

 

I have a Lariat 502a and added Lane keeping, what do you need to add Adaptive cruise?

 

I don't know if anyone has done a 2019 yet, they changed yet again from the 2018's. If you want to give it a shot look around page 11 here and you'll see posts there with the list of parts and FORScan changes needed.