2018: Adding Adaptive Cruise Control
#11
TOTM Sept. '18
iTrader: (1)
I have a IPMA from a Platinum that has the ACC. I'm waiting to order the CCM as Forscan doesn't have the compatibility to calibrate the 2018s IPMA/CCM yet. Once thats a green light I will install the new IPMA and CCM.
2018 CCM
H1BZ-9E731-AE
2018 CCM bracket
JL3Z-14C022-A
IPMA with Cads
JL3T-19H406-CE
2018 CCM
H1BZ-9E731-AE
2018 CCM bracket
JL3Z-14C022-A
IPMA with Cads
JL3T-19H406-CE
Antho,
On the IPMA could you double check that part number. It's not coming up with anything on Tasca's website...
Thanks!
Mike
#12
Originally Posted by OCMike
Antho,
On the IPMA could you double check that part number. It's not coming up with anything on Tasca's website...
Thanks!
Mike
On the IPMA could you double check that part number. It's not coming up with anything on Tasca's website...
Thanks!
Mike
Last edited by antho; 05-05-2018 at 12:06 AM.
The following users liked this post:
OCMike (05-05-2018)
#13
TOTM Sept. '18
iTrader: (1)
Kind of glad there might be a separate thread for 2018s. There are quite a few minor differences between the years.
Mike
#14
Originally Posted by OCMike
Thanks...That's the way I would normally do it too...I'm a ways a way from this mod anyway. I have to work down the pile of parts what I've bought already.
Kind of glad there might be a separate thread for 2018s. There are quite a few minor differences between the years.
Mike
Kind of glad there might be a separate thread for 2018s. There are quite a few minor differences between the years.
Mike
#15
#16
Originally Posted by Scooter70
So if we have auto headlights we may already have that part? I'm very interested if I can get it done for under $500.
#17
Senior Member
From right now even you get all the parts installed like the IPMA (above the mirror) and CAD ( front bumper). The big hold up is getting it calibrated. Forscan can not do it yet (there has been talked to the developer ) And if you have IDS you still can not calibrate do to it look at vin specific from what I hear. But there hope if Forscan deleloper add it in the next couple of beta versions.
#18
Senior Lurker
Can you do just the CCM install on the 18's without the CAD & IPMA if you wanted just the pre-18 style ACC? Or would the firmware be wrong? A friend would like to add ACC to his 18 XLT - the same as I added to my 16 XLT. I told him - I didn't think it was possible yet, but thought I'd ask...
#19
From right now even you get all the parts installed like the IPMA (above the mirror) and CAD ( front bumper). The big hold up is getting it calibrated. Forscan can not do it yet (there has been talked to the developer ) And if you have IDS you still can not calibrate do to it look at vin specific from what I hear. But there hope if Forscan deleloper add it in the next couple of beta versions.
#20
Can you do just the CCM install on the 18's without the CAD & IPMA if you wanted just the pre-18 style ACC? Or would the firmware be wrong? A friend would like to add ACC to his 18 XLT - the same as I added to my 16 XLT. I told him - I didn't think it was possible yet, but thought I'd ask...