2016 Topper 3rd brake light installation?
#1
Senior Member
Thread Starter
2016 Topper 3rd brake light installation?
I thought there is an extra wire near the spare tire placed specifically for this. Any links or info on how to wire a 3rd brake light would be much appreciated.
I know I can get a turn signal filter from etrailer but would rather find a dedicated wire.
Truck is a 16 xlt screw with locking tailgate.
Thank you!
I know I can get a turn signal filter from etrailer but would rather find a dedicated wire.
Truck is a 16 xlt screw with locking tailgate.
Thank you!
The following users liked this post:
RapalaTDD11 (09-16-2019)
#3
Senior Member
Thread Starter
Thanks, so to clarify the brake wire is inside the driver's side?
#4
Pull the drivers side kick panel off, there are two harnesses in that area, you want the purple with white stripe wire coming out of the black plug. Tap that for your topper light. There is a grommet under the carper that it can be fed through.
I just happened to come across these two in my album, so good timing.
I just happened to come across these two in my album, so good timing.
#5
Senior Member
Thread Starter
Pull the drivers side kick panel off, there are two harnesses in that area, you want the purple with white stripe wire coming out of the black plug. Tap that for your topper light. There is a grommet under the carper that it can be fed through.
I just happened to come across these two in my album, so good timing.
I just happened to come across these two in my album, so good timing.