2015+ F150 XL models -pics -mods - anything
#541
Senior Member
Reviving the old XL thread seeing what everyone has been up to lately.
I just added the OEM trailer brake controller I believe a lot of these mods are much easier for the XL owners with the bench seats.
Not long ago there was a thread on some motion sensor lights which I tried out and they are perfect for those of us who do not have the OEM cargo lights.
I was going to add the OEM cargo lights but since adding these I no longer have any need provides plenty of light.
Link to the lights:
https://www.amazon.com/gp/product/B0...iglink20295-20
I just added the OEM trailer brake controller I believe a lot of these mods are much easier for the XL owners with the bench seats.
Not long ago there was a thread on some motion sensor lights which I tried out and they are perfect for those of us who do not have the OEM cargo lights.
I was going to add the OEM cargo lights but since adding these I no longer have any need provides plenty of light.
Link to the lights:
https://www.amazon.com/gp/product/B0...iglink20295-20
The following 2 users liked this post by Summers22:
Florida_F150 (07-15-2018),
Max91 (07-15-2018)
#543
Senior Member
#545
Recently added Go Rhino RB10 Zinc-coated Steel running boards to replace broken factory ones, replaced stock brake rotors and pads with Power Stop Z36 Carbon Fiber Ceramic Brakes / Rotors, and replaced factory rear bump stops with Timbren SES rubber springs. Not much to see in the pics haha, but I'm happy with all three of the latest upgrades.
The following users liked this post:
Summers22 (07-17-2018)
#546
The only thing I've added to my XL is the armrest conversation. That's a must.
Pecked out on my iPhone.
Attachment 548154
Pecked out on my iPhone.
Attachment 548154
#547
Senior Member
I ordered the leather lid when I did mine and not the cloth lid.
https://www.f150forum.com/f118/2015-...pgrade-295926/
#548
Senior Member
#549
It's an easy twenty minute job. See the link below. That thread should cover adding the leather lid and converting the XL armrest to the XLT armrest with the swinging lid compartment.
I ordered the leather lid when I did mine and not the cloth lid.
https://www.f150forum.com/f118/2015-...pgrade-295926/
I ordered the leather lid when I did mine and not the cloth lid.
https://www.f150forum.com/f118/2015-...pgrade-295926/
#550
Yes A thread I've been Looking for!
Ive added Recon running lights.
Running boards that run from wheel to wheel
Line X Premium bed liner
Weather Tech Mats all around.
I have power mirrors but put Manual Tows on
I plan on upgrading to the 8" touch screen.
Leveling.
And powder coating my rims.
Plan on buying new primed Headlight molding and get them painted to match.
Also probably 30% tint all around.
Im also debating on putting Matte black hood and side decals.
Just cant decide if it will look good.
Ive added Recon running lights.
Running boards that run from wheel to wheel
Line X Premium bed liner
Weather Tech Mats all around.
I have power mirrors but put Manual Tows on
I plan on upgrading to the 8" touch screen.
Leveling.
And powder coating my rims.
Plan on buying new primed Headlight molding and get them painted to match.
Also probably 30% tint all around.
Im also debating on putting Matte black hood and side decals.
Just cant decide if it will look good.