kawi.hooligan

3000k is bright yellow

CPORTf150

Those look pretty good. Waiting for night light shots.

Simply plug and play connectors?

blackmars

looks sharp!! waiting for the night shots!

qsf150

Looks great! How was the installation?

I just ordered my pair, real truck price went up to 650. Got it from stage3 for. 550. Excited!

KevinInTexas

Pretty simple, takes about 45 minutes, everything is plug-n-play. You just need a 7mm(2 fender flare bolts), 8mm, 10mm socket, a long extension for one bolt, and a flat tip screw driver & pliers for the press plug on top of the head light trim. Watch the video on Raptor Retrofit.

the color on the DRL looks like 5500-6000k and the beams are about 4500k, thats going off of Morimoto's scale. The beams are H7 fittings, I'm going to mess around with it today and see if there is room for a morimoto HID kit. If anyone has any ideas on how to fit it up let me know. I drove home last night and the light output seemed a bit week, better than the halogens, but nothing great.

sevrith

So, this isn't an LED controller board, its simply a bulb? I'm confused.

KevinInTexas

The hi/low beam and turn signal are bulbs. The DRL is LED.

sunofabeach

since there are projectors in the housing, couldn't you just replace the halogen bulb with an LED or HID bulb and then adjust your headlight as needed?


I definitely like the look of these.

blackmars

Does the LED DLR turn on automatically if you put the switch to 'AUTO" ? i know that in the stock setup , the DLR is just a lower output of the headlight. So not sure how this was handled in this ANZO light.

Iczer

I don't see why not. This is probably near the top of my list to do.