2015 Anzo Headlights
#5081
I got my Anzos installed this weekend with Crystalux G9 LED bulbs for high and low beams, along with Parsam switchback turn signals. I'm really pleased with how they turned out. Thanks to everyone in this thread for the guidance.
Also, I'm in Canada so my DRLs are always on. The only 2 FORSCAN changes I needed to make were to disable hyperflash and enable the parking lights with DRLs:
The setting in FORSCAN to disable hyperflash because of the LED turn signals was:
726-27-01 x0xx xxxx xxxx
And DRL include parklamps to allow the LED strips to stay lit with my DRLs:
726-26-02 x1xx xxxx xxxx
The difference in light output is incredible, I've regretted not getting a Lariat or Platinum with LEDs until now. These look way better in my opinion:
Also, I'm in Canada so my DRLs are always on. The only 2 FORSCAN changes I needed to make were to disable hyperflash and enable the parking lights with DRLs:
The setting in FORSCAN to disable hyperflash because of the LED turn signals was:
726-27-01 x0xx xxxx xxxx
And DRL include parklamps to allow the LED strips to stay lit with my DRLs:
726-26-02 x1xx xxxx xxxx
The difference in light output is incredible, I've regretted not getting a Lariat or Platinum with LEDs until now. These look way better in my opinion:
Last edited by Kevin.TBO; 04-23-2018 at 07:19 PM.
The following users liked this post:
Coachdad (05-23-2018)
#5082
I installed the Crystalux G9 LED highs and lows in my Anzos today. The low beams were a tight fit with the fins fanned out, and I used the rubber boots for the high beams. I also used the Canbus anti-flicker wiring. Adam from 4xrtruckleds.com recommended "cramming it all in there" when it came to the wiring, so I don't have anything outside the cavities except for the wiring to the switchbacks. I ordered LED switchback turn signal lights (), but I'm sticking with the halogens for now because these don't fit very tight in the bulb sockets. Anyone else have this problem? I already had Morimoto LED fogs installed, and the color of the G9s appears to be slightly off from the Morimotos. I'll post some pics later this week.
#5083
Senior Member
iTrader: (1)
I installed the Crystalux G9 LED highs and lows in my Anzos today. The low beams were a tight fit with the fins fanned out, and I used the rubber boots for the high beams. I also used the Canbus anti-flicker wiring. Adam from 4xrtruckleds.com recommended "cramming it all in there" when it came to the wiring, so I don't have anything outside the cavities except for the wiring to the switchbacks. I ordered LED switchback turn signal lights (https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1), but I'm sticking with the halogens for now because these don't fit very tight in the bulb sockets. Anyone else have this problem? I already had Morimoto LED fogs installed, and the color of the G9s appears to be slightly off from the Morimotos. I'll post some pics later this week.
#5084
On the fence about buying the Crystalux G9 low beam because of bad purchases before with led bulbs in the projectors. Nice crisp 6000k colour led bulbs before they go in and once they are in the output turns to a dark blue and I can barely see. Running sylvania silver stars which are better than stock but want that nice bright colour the G9 gives off. Any knowledge as to what’s going on or any pictures/personal stories about how these are the answer I’m looking for? How is the light throw distance with these compared to halogen bulbs?
#5085
Senior Member
Anzo Switchback lights with Morimoto M-LEDs 4 sale
Hey, guys and Gals. After almost two years of really enjoying my F150, I'm trading it in for something smaller and much better on gas. As it turns out, I really don't need a truck and I drive way to much. Anyway, the reason I'm posting this is, that about 6 months ago I spend almost $1,800 to upgrading the halogen headlights to LEDs. I purchased Anzo Switchbacks and sent them to Lightwerkz where they installed Morimoto MLEDs and Switchback Halos. I'm very happy with how they came out and the light output they have. I don't want to trade the truck in with these headlights. If anyone is interested in buying them, please let me know. They've only been in the truck about 6 months, but since they're now used, I'd take off -$500 and let them go for around $1,300
IM me if you're seriously interested.
Thanks
Danny
IM me if you're seriously interested.
Thanks
Danny
Last edited by Slaterock; 05-01-2018 at 12:55 AM. Reason: adding one more picture
#5086
On the fence about buying the Crystalux G9 low beam because of bad purchases before with led bulbs in the projectors. Nice crisp 6000k colour led bulbs before they go in and once they are in the output turns to a dark blue and I can barely see. Running sylvania silver stars which are better than stock but want that nice bright colour the G9 gives off. Any knowledge as to what’s going on or any pictures/personal stories about how these are the answer I’m looking for? How is the light throw distance with these compared to halogen bulbs?
#5087
So I just wanted to ask, as I am new to this thread, what exactly are you doing in this pic? I installed mine last July, but didn't really have to anything like this that I remember except for the clips to splice the wires together that came with the lights. Just curious if you were doing something else.
#5088
I have switch backs on order and wondering if anyone has tried these yet.
http://www.oedro.com/oedro-v99-serie...conversion-kit
Also saw that some one removed the blinker light and just let the switchback work draw backs? Or I could do a low lum bulb so not so bright.
any feed back is better than no feed back.
Thanks
http://www.oedro.com/oedro-v99-serie...conversion-kit
Also saw that some one removed the blinker light and just let the switchback work draw backs? Or I could do a low lum bulb so not so bright.
any feed back is better than no feed back.
Thanks
#5089
Junior Member
Join Date: May 2017
Location: Naples, FL
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Anyone can answer this??? No one seems to know how.
I am looking to have amber always on with anzo lights. I want my DRLs to stay the same but when headlights turn on they are amber and never white.
Thanks! I know there is a exled TPC controller to do this but can we do it with Forescan and of so how or can someone tell me how to for the exiled TPC controller.
Thanks! I know there is a exled TPC controller to do this but can we do it with Forescan and of so how or can someone tell me how to for the exiled TPC controller.