Topic Sponsor
2015 - 2020 Ford F150 General discussion on the 13th generation Ford F150 truck.
Sponsored by:
Sponsored by:

2015 Anzo Headlights

Thread Tools
 
Search this Thread
 
Old 02-10-2018, 09:21 AM
  #5011  
Junior Member
 
God&Guns's Avatar
 
Join Date: Oct 2017
Location: NE Indiana
Posts: 21
Received 7 Likes on 7 Posts
Default

Originally Posted by tlfksu
How are people getting the turn signal bulb to stay off until the turn signal is used?
Probably not the correct way to do it, but I disconnected the turn signal bulb so it's not on with the eyebrow. The yellow eyebrow is definitely not as bright as the bulbs, but I count on the turn signal bulbs of my side mirrors to be seen too.
Old 02-10-2018, 03:32 PM
  #5012  
Senior Member
 
tlfksu's Avatar
 
Join Date: Nov 2016
Posts: 117
Received 13 Likes on 10 Posts
Default

Originally Posted by God&Guns
Probably not the correct way to do it, but I disconnected the turn signal bulb so it's not on with the eyebrow. The yellow eyebrow is definitely not as bright as the bulbs, but I count on the turn signal bulbs of my side mirrors to be seen too.
I considered it but don’t trust the switchback to be bright enough in the daytime. I’d still like to have an actual bulb.
Old 02-10-2018, 03:37 PM
  #5013  
Senior Member
 
Slaterock's Avatar
 
Join Date: Nov 2016
Location: Southern, CA
Posts: 197
Received 69 Likes on 40 Posts

Default

Originally Posted by FlawedXJ
Mine flat out turn off and on though. That's what I'm trying to chase down.
Change the power Source you used to wire up the relay harness. Use one that doesn't lose power when the start-stop function kicks in. That should solve your problem
Old 02-11-2018, 09:01 AM
  #5014  
Concrete Cowboy
 
FlawedXJ's Avatar
 
Join Date: Mar 2015
Location: NorAla
Posts: 97
Received 24 Likes on 13 Posts

Default

Originally Posted by Slaterock
Change the power Source you used to wire up the relay harness. Use one that doesn't lose power when the start-stop function kicks in. That should solve your problem
I swapped the wire harness to use relays and the battery. fixed it.
Old 02-12-2018, 12:51 PM
  #5015  
Junior Member
 
Firefighter200's Avatar
 
Join Date: Aug 2016
Posts: 23
Received 0 Likes on 0 Posts
Default

I tried browsing through all these post but I am wondering who has install the H7: MORIMOTO ELITE HID sytem into their Anzo lights? If you did, how do you like them and do you have any pictures of the install? I am trying to figure out where to mount the parts.
Old 02-12-2018, 12:55 PM
  #5016  
Senior Member
 
StangMan04's Avatar
 
Join Date: Sep 2015
Location: Richmond,Va
Posts: 893
Received 125 Likes on 95 Posts

Default

Originally Posted by Firefighter200
I tried browsing through all these post but I am wondering who has install the H7: MORIMOTO ELITE HID sytem into their Anzo lights? If you did, how do you like them and do you have any pictures of the install? I am trying to figure out where to mount the parts.
I installed mine this past Saturday.

I don't have any pictures. I mounted my passenger ballast to the metal by the battery and secured it with zip ties to a ground wire that was connected to the body. On the driver side I could not find a good spot that was clear and just ziptied the ballast to the harness behind the light. For the HD relay I screwed the bracket on the passenger side of the radiator fan cover so it would be facing down like suggested.
Old 02-12-2018, 01:04 PM
  #5017  
Junior Member
 
Firefighter200's Avatar
 
Join Date: Aug 2016
Posts: 23
Received 0 Likes on 0 Posts
Default

Originally Posted by StangMan04
I installed mine this past Saturday.

I don't have any pictures. I mounted my passenger ballast to the metal by the battery and secured it with zip ties to a ground wire that was connected to the body. On the driver side I could not find a good spot that was clear and just ziptied the ballast to the harness behind the light. For the HD relay I screwed the bracket on the passenger side of the radiator fan cover so it would be facing down like suggested.
Thanks, how do you like the bulbs? Also, if you could grab any pictures, that would be great.
Old 02-12-2018, 01:08 PM
  #5018  
Senior Member
 
StangMan04's Avatar
 
Join Date: Sep 2015
Location: Richmond,Va
Posts: 893
Received 125 Likes on 95 Posts

Default

Originally Posted by Firefighter200
Thanks, how do you like the bulbs? Also, if you could grab any pictures, that would be great.
I replaced my XHP50 bulbs that I had in the low beams. I like the HIDs, much better reach than the LEDs. I my passenger low beam out and it turned out to be a loose connection on the relocation kit that 4x4truckleds sold. It was my fault that the connection was loose due to the tape not securing the relocation wire well enough.

Anyways, I haven't taken my truck to a dark place when I drive it that night at dark I was in the city and other lite areas. But, I do notice the beam hitting down further on signs and briefly in my neighborhood since it was kind of dark there.

I will try to grab pictures but it looks to be raining all week.
Old 02-12-2018, 01:11 PM
  #5019  
Vroom vroom
 
5.Bro's Avatar
 
Join Date: Jun 2016
Posts: 511
Received 415 Likes on 144 Posts

Default

Had HIDs installed on saturday. 5k
Attached Thumbnails 2015 Anzo Headlights-img_0389.jpg  
Old 02-13-2018, 03:10 PM
  #5020  
Senior Member
 
Aashu's Avatar
 
Join Date: Apr 2016
Location: scotch plains, nj
Posts: 636
Received 52 Likes on 44 Posts
Default Hi

Originally Posted by StangMan04
I replaced my XHP50 bulbs that I had in the low beams. I like the HIDs, much better reach than the LEDs. I my passenger low beam out and it turned out to be a loose connection on the relocation kit that 4x4truckleds sold. It was my fault that the connection was loose due to the tape not securing the relocation wire well enough.

Anyways, I haven't taken my truck to a dark place when I drive it that night at dark I was in the city and other lite areas. But, I do notice the beam hitting down further on signs and briefly in my neighborhood since it was kind of dark there.

I will try to grab pictures but it looks to be raining all week.

These look great. What HID , can you point to the resource ?


Quick Reply: 2015 Anzo Headlights



All times are GMT -4. The time now is 08:03 AM.