2015 Anzo Headlights
#4372
Originally Posted by 2016BoostedGreyGoose
I didnt crimp, I soldered electrical taped and shrink tubed with adhesive inside, then wrapped with electrical tape full length and finally fabric taped.
The following users liked this post:
2016BoostedGreyGoose (08-06-2017)
The following users liked this post:
2016BoostedGreyGoose (08-06-2017)
#4374
Senior Member
Originally Posted by 4x4TruckLEDS.com
Nothing negative other then you have to buy them. You can always install them without, but you know the labor involved in adding them (you could always go in through the wheel well though)
The following users liked this post:
2016BoostedGreyGoose (09-27-2017)
#4378
Just wanted to let everyone know who might be considering buying a set of Anzos, AutoAnything.com has them and if you use code "Fast30", you can get a set of the switchbacks for $441 or a set of the non-switchbacks for $415. They have a promo for Anzos currently for 20% off. You need to enter the "Fast30" code to replace the default 20% code. Free shipping too!
The following users liked this post:
carrierj (08-07-2017)
#4379
Senior Member
I have them installed in my OEM halogen housing and they fit snug.
The following users liked this post:
2016BoostedGreyGoose (08-07-2017)
#4380
Senior Member
iTrader: (1)
The LED switchback bulb you installed for park/turn, does it fit well into the connector? A few pages back some were talking about them not fitting well and needing to use silicone to keep them in. I'm curious if that was an isolated issue, or typical of the Anzos. I have these on my list to do. They look great!
I have them installed in my OEM halogen housing and they fit snug.
I have them installed in my OEM halogen housing and they fit snug.
The following users liked this post:
carrierj (08-07-2017)