Dauer02

I think I have finally decided on my tire/wheel setup, but just want to double check to make sure I wont have any clearance issues. I have a 2016 supercab FX4 with a readlift 2.25" level kit. Looking at going with the fuel mavericks +20 offset, and then Nitto Ridge Grapplers in 295/70/18. I done some research and it looks like you can clear that big of a tire on stock wheels, but with the aftermarket offset causing the tires to stick out just a little more cause problems? Thanks

idrive

iTrader: (3)

Very close. 285's would have no problems. The 295's will most likely rub turning in reverse IF you have mudflaps.

Cajuntriton

I have same lift and wheels but in 20" with 295/60/20 Toyos, only rub crash bar at full lock and fast back up out of my elevated driveway, you should be fine.

ANCiENT88s

I have terra grapplers in that size with +18 offset wheels and a 2.5" level. Had to trim my mud flaps. Clears everything else fine.

Scott91370

Totally different height though. On an 18" wheel that is a 32" tire and on the 20" wheel it is a 34" tire.
But if your tires do not rub and you have the same offset then the original poster shouldn't have an issue.

Cajuntriton

But his is a 295/70 and mine a 295/60 so they are both near 34" ;-)

Dauer02

How much room do you have have between the tires and the crash bars? Is it pretty tight? Thanks

Annapolis

Here is my set up. No rubbing. No trimming.
2" level. 20x9 +20 295/60/20

ANCiENT88s

A little less than an inch in front and back.