2015 and 2016 lifted 2wd
The following 2 users liked this post by white_dc:
heidrickla (11-10-2016),
ScrappyF150 (11-29-2016)
#23
#25
Senior Member
The following users liked this post:
ScrappyF150 (11-29-2016)
#26
Fake Ballin for da Gram
iTrader: (12)
A 4"-4.5" would give it a way better look. Last I spoke with Rough Country, they were waiting to exhaust the current stock before making the rear block smaller in the 2WD kit. Until then I either go down in the back or up in the front. I'll add a 1" Tuff Country pre-load spacer to make it 7" front lift and give a more level look. The resulting height is closer to a 4WD with a 6" and the arm angles are the same too. (pictured below)
Here's a pic to compare without the shackle...
The following users liked this post:
ScrappyF150 (11-29-2016)
The following users liked this post:
ScrappyF150 (11-29-2016)
#28
5.0 Powaaa
The following users liked this post:
ScrappyF150 (11-29-2016)
#29
Senior Member
I also have the maxtrac on my rig on 35s
As said above it does take alil in the back. I plan to either lift the front more with an adjustable shock and add the 5 inch block in the rear or see if a 4.5 option comes out.
Attachment 455855
Attachment 455854
As said above it does take alil in the back. I plan to either lift the front more with an adjustable shock and add the 5 inch block in the rear or see if a 4.5 option comes out.
Attachment 455855
Attachment 455854