Especial86

iTrader: (1)

X2 do you guys get any rubbing?

bigdaddymac

No rubbing on my setup. Its close but I have tested at full lock forward and reverse, up and down hills and nothing is touching.

speeddemon0712

I only rub with full lock, in reverse, with someone else in the truck with me. Other than that, it never rubs.

ESPO4442

Did you spread the crash bars?

slamm

Looks great, can you share what level kit you used, blocks in the back? Di you use wheel spacers?

Thanks

speeddemon0712

I swapped the fronts from side to side. That adds about 1/2" of clearance, same results you'd get with spreading them.

Domo Dan

2.5” AutoSpring level up front with nothing in the back. I’m running 295/65R20 (just over 35”). No rubbing. Perfectly level.

Filter

I put the Rough Country lift in mine, this included the spacers for the front. Rear shocks and rear blocks. I didn't have time to put the rear blocks in but I did get the shocks in. Shocks really do improve the "skipping and jittering" in the rear.
http://www.stage3motorsports.com/554...-Lift-Kit.html

Anyways, here are some pictures, remember the rear blocks are not in.

bigdaddymac

2" leveling kit by Summit Performance (just a basic spacer puck). No other suspension work done, stock rear until I replace the shocks with probably Bilsteins. Doubt I will add any more lift though. No wheel spacers but I have been researching a 1/2 in to 1 in just to get some more separation from the UCA.

Hartleyf150

Don’t mean to completely steal from your rig but it’s a badass look! Mine sharing what wheels and tires you have on it? Brand and specs on both.