'16 lower valance/airdam removal?
#51
I trimmed mine because I didn't want the tabs or empty holes. I cut it along the contour of the airdam. It was easy to do with a dremel cutting wheel. With the trim job you get the added clearance and it still looks like nothing is missing from the front end. Mileage did not change.
The following users liked this post:
lansing0713 (10-17-2016)
#52
No fart cans allowed
I had originally pulled mine off as well, mainly because I couldn't squeeze under the truck to do an oil change because the flap hung down so low. I also took a razor knife to mine, followed by smoothing off the cut edges on my bench grinder. I trimmed a lot more off than the other pictures I've seen.