15+ Oxford White post em up!!!!
#863
Added some new wheel well liners from Ford and a MBRP side exit exhaust. The exhaust is pretty loud on cold start but settles down after a moment. It's not obnoxious on the interior but it's definitely noticeable. You can easily hold a conversation with a passenger. Oh and I pity anyone in the lane adjacent to the tips when I stand on the gas. It screams when provoked.
Pay no attention to the tip misalignment, I have since leveled them. My only complain was the front tip contacted the lower cab corner, pinch weld [paste and rivet?] and would buzz. Drove me crazy but I put a couple of hose clamps to prevent the metal bracket from sliding around in the rubber hanger. I'll take pics to illustrate this if anyone wants to see them.
Now I just need to install the 3" x 5.5" Belltech lowering kit, add some wheels and a Boss 302 intake! I'm shooting for low 14’s/high 13's on drag radials with just the Omega Tune, JLT Intake and Exhaust.
Pay no attention to the tip misalignment, I have since leveled them. My only complain was the front tip contacted the lower cab corner, pinch weld [paste and rivet?] and would buzz. Drove me crazy but I put a couple of hose clamps to prevent the metal bracket from sliding around in the rubber hanger. I'll take pics to illustrate this if anyone wants to see them.
Now I just need to install the 3" x 5.5" Belltech lowering kit, add some wheels and a Boss 302 intake! I'm shooting for low 14’s/high 13's on drag radials with just the Omega Tune, JLT Intake and Exhaust.
Last edited by white15; 12-02-2017 at 09:19 AM.
The following users liked this post:
white15 (12-02-2017)
#866
looks like a 4" lift
#868
Recently retro’d headlights, added dual rigids to replace the Morimoto fogs and put on studded duratracs for winter
#870