12 Volt Solutions Remote Start
#12
Originally Posted by jayb79
I got the lock/unlock/lock kit no need to disable anything. I did need to turn on remote option with Forscan though.
https://www.ebay.com/itm/15-thru-18-...72.m2749.l2649
https://www.ebay.com/itm/15-thru-18-...72.m2749.l2649
Also it came with a small jumper wire in a separate bag. I installed that to make it work. I was hoping the perimeter alarm could be disabled and only use his for remote start. Apparently I'm missing something. Any help is appreciated.
#14
Originally Posted by jayb79
When I put that jumper in the perimeter alarm seems to have stopped working on mine. Does it still work on yours?
#15
Senior Member
I assume you did this change,
I think these are the two changes with FORScan, the BCM and IPC.
726-22-02 xxx* xxxx xxxx Remote Start Enable Cfg: 0=disabled, 1=enabled
720-02-02 xxxx *xxx Remote Start: 0=disabled & D=disabled is listed
Here is vid showing the menu location at 2:45
https://www.youtube.com/watch?v=nUix...ature=youtu.be
I am not sure why my perimeter alarm doesn't work, it was working before I put the jumper in but I was also playing with the sensitivity and maybe that is why it doesn't work.
I think these are the two changes with FORScan, the BCM and IPC.
726-22-02 xxx* xxxx xxxx Remote Start Enable Cfg: 0=disabled, 1=enabled
720-02-02 xxxx *xxx Remote Start: 0=disabled & D=disabled is listed
Here is vid showing the menu location at 2:45
https://www.youtube.com/watch?v=nUix...ature=youtu.be
I am not sure why my perimeter alarm doesn't work, it was working before I put the jumper in but I was also playing with the sensitivity and maybe that is why it doesn't work.
Last edited by jayb79; 12-07-2017 at 09:38 PM.
#16
Originally Posted by jayb79
I assume you did this change,
I think these are the two changes with FORScan, the BCM and IPC.
726-22-02 xxx* xxxx xxxx Remote Start Enable Cfg: 0=disabled, 1=enabled
720-02-02 xxxx *xxx Remote Start: 0=disabled & D=disabled is listed
Here is vid showing the menu location at 2:45
https://www.youtube.com/watch?v=nUix...ature=youtu.be
I am not sure why my perimeter alarm doesn't work, it was working before I put the jumper in but I was also playing with the sensitivity and maybe that is why it doesn't work.
I think these are the two changes with FORScan, the BCM and IPC.
726-22-02 xxx* xxxx xxxx Remote Start Enable Cfg: 0=disabled, 1=enabled
720-02-02 xxxx *xxx Remote Start: 0=disabled & D=disabled is listed
Here is vid showing the menu location at 2:45
https://www.youtube.com/watch?v=nUix...ature=youtu.be
I am not sure why my perimeter alarm doesn't work, it was working before I put the jumper in but I was also playing with the sensitivity and maybe that is why it doesn't work.
#18
I got it!!! Thank you so much!!!! I changed 720-02-02 to xxxx Axxx. The whole time I've made changes to other features I've looked at the common tab on the spreadsheet and I didn't see 720-02-02 next to remote start. Thanks again!!!
#19
Mine works great. 5min install. No forscan. I put a simple toggle switch on the horn and turn it off when I'm done in the evening. Turn it back on when I get in the truck in the morning
#20
Has anyone had any problems with climate control not turning on with the remote start? My xlt remote starts just fine but I have to put in the key and turn it to have the heat or ac on. I have one of the bay harnesses. Thanks!