2013 Prerunner Build

Thread Tools
 
Search this Thread
 
Old Dec 9, 2016 | 03:02 PM
  #1  
project_sacrunner's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2016
Posts: 14
Likes: 3
From: Sacramento, CA
Talking 2013 Prerunner Build

Hey guys I am currently build a slight pre runner. I am new to the build stuff so I am wondering if it important to swap out my gears if I upgrade to 35s. The truck current has the stock 3.56 gears I believe.

I will keep the thread updated with pictures of the build but unfortunately the suspension won't be shipping until about the 30th

I would like to see some other peoples builds so feel free to post them below! Thank you anything helps!
Reply
Old Dec 17, 2016 | 12:22 AM
  #2  
traxiii's Avatar
5 Year Member
15 Year Member
 
Joined: May 2009
Posts: 172
Likes: 58
From: NOR CAL
Default

I'm running 3.55 gears with 35" BFG KO2s and the speedo is off 10% and the low speed and climbing power are down. I have 4.56 gears sitting in my man-cave, just need to get them installed. They will get things back to normal, speedo and power wise.
Reply
Old Jan 11, 2017 | 09:50 AM
  #3  
hobolabo's Avatar
Senior Member
 
Joined: Feb 2014
Posts: 207
Likes: 32
From: Northern MI Lower peninsula
Default

[QUOTE="project_sacrunner;5077126"]Hey guys I am currently build a slight pre runner. I am new to the build stuff so I am wondering if it important to swap out my gears if I upgrade to 35s. The truck current has the stock 3.56 gears I believe.

I will keep the thread updated with pictures of the build but unfortunately the suspension won't be shipping until about the 30th

I would like to see some other peoples builds so feel free to post them below! Thank you anything

How do i post a new post? Cannot figure it out.... no tabs show up on mobil site.
Thanks, hobolabo, newbie
Reply
Old Jan 31, 2017 | 01:28 AM
  #4  
muddinNhuntin's Avatar
Member
 
Joined: Jan 2017
Posts: 36
Likes: 1
Default

This build is awesome!
Reply
Old Feb 1, 2017 | 07:54 AM
  #5  
hobolabo's Avatar
Senior Member
 
Joined: Feb 2014
Posts: 207
Likes: 32
From: Northern MI Lower peninsula
Default

Finally got the broken exhaust bolts out after 8 hrs + - a little, removed steering box and ordered parts, removed brake hard lines now to rebend new ones and replaced proportion valve, sure is easier without engine in the way....last rear cab corner comes out today for repair, then clean up everything to get ready for paint.

Last edited by hobolabo; Feb 1, 2017 at 08:00 AM.
Reply
Old Feb 1, 2017 | 08:18 AM
  #6  
hobolabo's Avatar
Senior Member
 
Joined: Feb 2014
Posts: 207
Likes: 32
From: Northern MI Lower peninsula
Default

Sorry guys, new to this and got in wrong area but your build looks real nice. I like simplicity myself.
Reply




All times are GMT -4. The time now is 02:39 AM.