Topic Sponsor
Engine / Drivetrain Talk 6 or 8 Cylinders? Come talk about it.

Cam Phasers

Old Nov 8, 2011 | 05:58 PM
  #21  
Vrod's Avatar
Junior Member
 
Joined: Oct 2011
Posts: 4
Likes: 0
Default

That sucks! Ok thanks, should I be worried about it?
Reply
Old Nov 25, 2011 | 11:35 PM
  #22  
papa tiger's Avatar
Member
 
Joined: Nov 2011
Posts: 32,108
Likes: 240
Default

Instal an aftermarket Cam Phasor limiter kit to get better performance and less noise.
Reply
Old Dec 5, 2011 | 04:57 AM
  #23  
fiaghters87's Avatar
Junior Member
 
Joined: Dec 2011
Posts: 1
Likes: 0
Default

So if there is no engine damage going to result from a loud cam phaser, and the check engine light is not on. Why would I spend the $1500 bucks to get the Phaser replaced????
Reply
Old Dec 6, 2011 | 04:14 PM
  #24  
socal50's Avatar
Senior Member
10 Year Member
 
Joined: Oct 2011
Posts: 232
Likes: 0
Default

Phasers make the noise and retard due to oil starvation check ur cam caps for scoring and ur rod bearing I see it all the time
Reply
Old Dec 17, 2011 | 07:43 AM
  #25  
sniswend's Avatar
Member
 
Joined: Dec 2011
Posts: 54
Likes: 1
Default

I would take it to the dealer but they will most likely tell you to have them changed. The ticking noise can mean one of several things; cam phasers, lash adjustors, or or lifters, cam phaser noise itself won't cause engine damage but if the phasers fail then the truck will fail to run. The lash adjusters keep the correct amount of tension on you timing chain. If the lash adjusters, or lifters are bad then you engine will have lower oil pressure which can cause oil starvation in the heads, which causes engine failure. In the picture below the cam phaser is the top circle part that the chain raps around. The lash adjustors are the orange part keeping tension on the chain. In my experience if the cam phasers are bad, the lash adjustors are also bad.
Attached Thumbnails Cam Phasers-phaserreplacment.jpg  
Reply
Old Dec 23, 2011 | 10:39 PM
  #26  
ellis4pa's Avatar
Senior Member
 
Joined: Nov 2011
Posts: 491
Likes: 10
Default

great pic and description sniswend, my truck is in the shop haveing the procedure done, only because its in the shop with a blown tranny, so that was tacked on and my warranty will cover half of the $1970 to replace the phasers and such.
Reply
Old Dec 25, 2011 | 10:12 AM
  #27  
papa tiger's Avatar
Member
 
Joined: Nov 2011
Posts: 32,108
Likes: 240
Thumbs up

Originally Posted by blkfx4
So if there is no engine damage going to result from a loud cam phaser, and the check engine light is not on. Why would I spend the $1500 bucks to get the Phaser replaced????

I mean mine sounds so bad that it is very loud and sounds like a diesel engine only at warm idle, ( peole have asked if it is )after 1200 rpm its fine? no sound. So I know its the phasers and the check eng light is not on.

I just want to know if I should spend the money to get them replaced. Is there a updated cam phaser from the stock one that I have now in my 04 5.4

Thanks


I know a guy with a bent rod sounded like what ???
Reply
Old Jan 4, 2012 | 03:58 PM
  #28  
kevhead75's Avatar
Senior Member
 
Joined: May 2009
Posts: 730
Likes: 4
From: Elmhurst, IL
Default

Originally Posted by sniswend
In the picture below the cam phaser is the top circle part that the chain raps around. The lash adjustors are the orange part keeping tension on the chain. In my experience if the cam phasers are bad, the lash adjustors are also bad.
Not sure where you got your terminology from but the orange pieces are not lash adjusters. The top piece that is black and orange is the cam chain tensioner. The black and orange piece below that is the chain guide and the black piece across from that is the other guide.
Lash adjusters are in the head and take the place of the traditional lifters you would see in a push rod motor.
Reply
Old Jan 19, 2012 | 08:09 PM
  #29  
gunforhire's Avatar
fomerly 1quiksvx
 
Joined: Jul 2008
Posts: 80
Likes: 0
Default

Originally Posted by monkeyheadboy
My ticking went away after I out a motorcraft oil filter and 5W-20 synthetic blend oil in my 2006 5.4.

Many aftermarket filters do not have a anti drain back valve. filters made by purolator, including the motorcraft filters do. make sure you stick with them and stay away from a certain orange filter....
Reply
Old Feb 15, 2012 | 10:38 PM
  #30  
nitehunter's Avatar
Junior Member
 
Joined: Feb 2012
Posts: 11
Likes: 1
Default

So from what i've read, my truck has the diesel sound to it, i've listened to a few videos, and from what i've heard, it seems more like the injectors rather than cam noise. Any input, or have videos that show the difference.
Reply

Thread Tools
Search this Thread

All times are GMT -4. The time now is 04:03 AM.