zolson

Hey guys so a couple weeks ago i bought a 351w off of craigslist out of i think the guy said a 94 f250. Anyway i went and ran the numbers on the side of the block and they came back as an '89 crown vic block. WTF!?! why is this if it came out of an f250 that the guy bought brand new??? the identication number on the side was E9AE-6015-AA-13 then just under it to the right looks like maybe 9H24 or just 9H2. Also in the lifter valley it says 351 WCP-14. what does all this mean!? Help me out because im lost on this one.

zolson

Here's some pics of the #s

zolson

heres one with the block picture flipped the right way

MKRanger

They would be similar blocks with little or no major differences. One piece rear main seal, standard hydraulic lifter valley, two bolt mains, same 4" bore and 3.49" stroke crank, same rods, and either cast or possibly hyper eutectic pistons. If your going to build a motor with less than 400HP, you should be fine. The only difference between a truck and passenger car was the intake. Most of the late model Windsor family blocks came out of Mexico.

zolson

Thank you!! If I'm going to build it it will just be heads cam and intake. That would put it in the mid 300s

mikewayne

Thanks for putting such a post which is highly informative and will be helpful to all the newbies, as all the old pros who are looking forward upgrade its car.