When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Slave cylinder started leaking - so got into the repair, dropped M5OD - discovered entire clutch and flywheel were shot. So, got all the new stuff... and can't get the %&@$* pilot bearing out! UGH! It's the small things in life that frustrate.... IJS
Most AutoZones has a loaner tool for removing them.
Most AutoZones has a loaner tool for removing them.
I have the tool and it removed the inner race only! Which is my frustration. It looks like I may have to carefully chisel it out, unless someone else here knows another trick? heat?
I have the tool and it removed the inner race only! Which is my frustration. It looks like I may have to carefully chisel it out, unless someone else here knows another trick? heat?
Tooked off the aftermarket fiberglass rocker panels/body moldings, and actually took off the chrome bed rail caps as well. I will post an updated pic of that later - I wanted to show off more of the original, clean white paint instead of having the chrome cover it up! Not sure what else I want to do with it project wise... Any recommendations are accepted
Gettin closer to having my steps back on.
I fabbed these supports from 1-1/4" square tubing, 1/8" wall thickness. They feel plenty stout. I've also made some cutouts for some LED light strips to light up the steps.
10-24-2016, 07:19 AM
Gettin closer to having my steps back on.
