jared424

Put new glow plug relay and controller on. Put steering stabilizer on. Straight wired my injector pump to a toggle switch in the cab. Found out the fuel shut off valve in the injector pump is bad. So time for a new injector pump. Truck is done for the next week or so til I can afford the $450 for the injector pump plus install

Scraptor

Sleazy greazy Ziploc trick, put your bearing grease in a big ziploc bag, drop in the bearing, work the grease back and forth thru the bearing by squeezing the bag, use the bag to slide the bearing on the spindle , and seal up the bag for storage, makes less greasy hands, wastes little to no grease.

SAYiWONT8

^^^ Good idea. Ill be picking up some bags for work.

Southernblues

Fixed a bad ground on my KC lights

Just call me Sean

iTrader: (1)

Bolted the carrier on, with exhaust clamps. U-bolts on bottom, which are pretty damn crappy, and the brackets on top with nuts and bolts.



I didn't take an overall picture yet, my wifes Blazer is in the way.

Welder7018

Painted her

dhonnoll

You gonna wet sand that, clear it and wet sand it again and wax it and make it not even look rattle canned?

Welder7018

It's up to my little brother it's his truck lol I'm just doing all the work to it. Since he don't know squat about it. But I'm painting it to his specs lol I'm planing on bed lining my 92 instead of painting it.

65mechanic

Are you going to do the colored bed liner they make?

Welder7018

Yep plan on going with red. Going to roughly fix the rust then bed line it.