Update part "2" of 94 XLT(*pictures)
#1
Senior Member
Thread Starter
Update part "2" of 94 XLT(*pictures)
Got top half of the 351 put together. Installed the heads and bolted up the oil pan. Still need to order pushrods though, plus get intake and valve covers cleaned & detailed . Then after the holidays may send the headers to be jet hot coated. And, maybe one day I will actually get to install this ,.....LOL
Any one car to guess-timate on power out put???
Run-down of combo..
94 block bored .030- (bored & honed with torque plate),
Kieth Black Silv-O-lite pistons -(6.5cc valve reliefs),
TFS stage one cam,
GT40- X303 Heads(64cc chambers),
Crane 1.6 roller rockers,
Gt40 Intake,
65mm TB,
24 injectors,
73mm maf,
FMS 1 5.8 shorty headers,
Cant decide on exhaust,, either going to run 2.25 pipe into muffler with a 3" single tail plip in stock location... OR... 2.5 duals coming like a lightning.... But either way going to have hi flow converters on it... And dynomax mufflers...
Anyway,,,Here are currnet pictures.... What she look like so far?????
Any one car to guess-timate on power out put???
Run-down of combo..
94 block bored .030- (bored & honed with torque plate),
Kieth Black Silv-O-lite pistons -(6.5cc valve reliefs),
TFS stage one cam,
GT40- X303 Heads(64cc chambers),
Crane 1.6 roller rockers,
Gt40 Intake,
65mm TB,
24 injectors,
73mm maf,
FMS 1 5.8 shorty headers,
Cant decide on exhaust,, either going to run 2.25 pipe into muffler with a 3" single tail plip in stock location... OR... 2.5 duals coming like a lightning.... But either way going to have hi flow converters on it... And dynomax mufflers...
Anyway,,,Here are currnet pictures.... What she look like so far?????
Last edited by ma94xlt; 12-12-2008 at 02:52 PM.
#7
Senior Member
Thread Starter
These heads are bolt down rockers. But I think they do make a set of bolt downs adjustable where the puch rod is on the backside. I am hoping when I measure the FMS 7.56's will work, because can get those from Jegs pretty cheap. But if not will just have to order the length I need...