kc8yhk

I have a 1993 F-150 2 wheel drive reg cab with the inline 6 300. My clutch peddle got a lot of play in, to the point that the clutch peddle would stick to the floor and I had to reach down and pull it up. Looking under the truck it was leaking fluid from the bottom of the bell housing.

So I pulled the transmission and replaced the slave cyl. While I was in there I went ahead and replaced the clutch and pressure plate. I also replaced the clutch master cyl and hydraulic line. I figured I would just replace it ALL and be done with it.

Now here is my problem. its leaking brake fluid like crazy where the hydraulic line connects to the slave cyl. I've pulled it apart and checked the 0-ring on the end and it looks fine. snap it back in and she leaks like crazy again.

Does anyone have any tips or advice what to do next?

Just call me Sean

iTrader: (1)

You might need a new line.

flareside_thunder

x2 on new line...take it back where you got it and have them defect it out.