Por 15 questions.
#1
Senior Member
Thread Starter
Por 15 questions.
Well, I'm in the middle of doing a restoration on my truck. I'm planing on sandblasting the frame, bottom of the cab and the bottom of the box. Just wondering after I do that, do I need to use a primer, or does it act as a base itself? Second, can I use a spray gun, or does it get put on by a brush? And last, how much should I get? A quart is 60 bucks, but I'm not sure if that would be enough, anyone done this before?
#2
Senior Member
Bare metal needs to be prepped first, either with a self etching primer and then scuffed up, or use this.
http://www.por15.com/METAL-READY/productinfo/MRG/
POR15 is brushed/rolled on. As for how much, 1 quart gives 2 coats on a frame, so you might need 2 quarts.
http://www.por15.com/METAL-READY/productinfo/MRG/
POR15 is brushed/rolled on. As for how much, 1 quart gives 2 coats on a frame, so you might need 2 quarts.