Topic Sponsor
1987 - 1996 F150 Still running strong! Talk about your 8th and 9th generation Ford F150 trucks.

Vacuum line help please

Thread Tools
 
Search this Thread
 
Old 01-20-2013, 05:22 PM
  #1  
Senior Member
Thread Starter
 
radioactive's Avatar
 
Join Date: Mar 2011
Posts: 103
Received 1 Like on 1 Post

Default Vacuum line help please

When the neighbor pulled the throttle body most of the plastic vacuum lines snapped in multiple pieces. We have most of the routing figured out by using the diagram under the hood, but have a couple of loose ends we can't figure out. The two red lines from the tree on the throttle body are routed behind and then up alongside the engine with at least one going to the charcoal canister. That still leaves two red lines on the passenger side we don't know where they go. It's almost as if there was a two into one connector that is missing

Any one have the key to the puzzle?

Thanks
Old 01-20-2013, 08:06 PM
  #2  
We'd do it

iTrader: (1)
 
Just call me Sean's Avatar
 
Join Date: May 2008
Location: Orlando,Fl.
Posts: 35,602
Received 449 Likes on 402 Posts

Default

Just follow the diagram, that's why it's there.
Old 01-20-2013, 08:23 PM
  #3  
lost my Car again...
 
TheCollector's Avatar
 
Join Date: Jun 2010
Location: Auburn Maine
Posts: 6,311
Received 41 Likes on 41 Posts

Default

the Diagram on the hood should be really straight forward. sometimes they over simplify it but you can get the good general idea on what goes where.
Old 01-20-2013, 09:11 PM
  #4  
Senior Member
Thread Starter
 
radioactive's Avatar
 
Join Date: Mar 2011
Posts: 103
Received 1 Like on 1 Post

Default

The diagram only shows one red line going to the passenger side and to the charcoal canister, but there are two red lines coming off the tree on the throttle body and routed behind the engine and to the passenger side. That's why we cant figure out where the other one connects.. He said when he unhooked them to take off the throttle body they shattered into several pieces, so we can't reconstruct them that way. We have looked high and low for some type of T or Y connector that might have fallen when they broke, but no such luck.



Quick Reply: Vacuum line help please



All times are GMT -4. The time now is 04:30 PM.