MReeceW's Gen. Forrest Build
#91
I was 2wd once.
Thread Starter
A couple new mods.
35" KM2's
Front Bumper and new LEDs to replace the koncept led bar
Trailer Hitch
Console with cup holder
True Ivory 7 Ball Shift ****
35" KM2's
Front Bumper and new LEDs to replace the koncept led bar
Trailer Hitch
Console with cup holder
True Ivory 7 Ball Shift ****
Last edited by MReeceW; 09-23-2012 at 12:51 AM.
#95
I was 2wd once.
Thread Starter
lol it already went to the scrap yard sorry lol.
#96
I was 2wd once.
Thread Starter
Its all done now. No radius arm drop brackets, cherokee 4.5" lift coils, f350 steering. the truck sits around 3.75-4 inchs of lift to keep my center of gravity low.
Well heres some pictures from when i was testing flex.
This wall is 32 inchs tall... and I actually hit the basketball hoop with my bumper.
Heres a side view, It doesn't look like much considering those are 35's and its only got around 3.5 inchs of lift now. Also I need something taller to park on so I can find out how far down it will really go.
Heres the compressed coil and shock.
And sort of a profile when it was backed in the other way.
Regular ride height before I changed the shackle bolts. (I moved the springs up in the shackles to try and get it level) In person it had a bit of a rake and I didn't like it very much.
Well heres some pictures from when i was testing flex.
This wall is 32 inchs tall... and I actually hit the basketball hoop with my bumper.
Heres a side view, It doesn't look like much considering those are 35's and its only got around 3.5 inchs of lift now. Also I need something taller to park on so I can find out how far down it will really go.
Heres the compressed coil and shock.
And sort of a profile when it was backed in the other way.
Regular ride height before I changed the shackle bolts. (I moved the springs up in the shackles to try and get it level) In person it had a bit of a rake and I didn't like it very much.
#97
Senior Member
iTrader: (1)
I am loving your truck man! I just went through the whole build thread and that sir is great work!
The following users liked this post:
MReeceW (08-21-2013)