Leaf Spring To Frame
03-29-2007, 12:46 PM
#1
Junior Member
Thread Starter
Join Date: Mar 2007
Location: NC
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Leaf Spring To Frame
I Own A 95 F150 Xlt.im Not Sure Of The Name Of The Bracket That Connects The Leaf Spring To The Frame.it Has Broken.i Have Looked For This Part Online And Did Not See It.is This Fixable
04-01-2007, 10:33 AM
#7
Junior Member
Join Date: Mar 2007
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
If it's like my 93 Lightning then they are rivets. Drill out a 3/16" hole in the middle of the rivet, then a 1/4" hole, then use a chisel to cut the head off, then punch it out the other side. Drill at a slow speed, use cutting oil, push hard, or use high rpm and a dry bit....and use about 3 bits for each rivet. BTDT
I took of my brackets to install a lowering kit (sorry I threw out the old ones). Moog sells new front radius arm brackets, maybe they sell rear ones. Or see if someone with a lowering kit will give you thier old bracket.
I am talking about the front braket, the rear hanger is similar, IIRC
I took of my brackets to install a lowering kit (sorry I threw out the old ones). Moog sells new front radius arm brackets, maybe they sell rear ones. Or see if someone with a lowering kit will give you thier old bracket.
I am talking about the front braket, the rear hanger is similar, IIRC