Fan Clutch Removal for Water Pump Replacement
#1
Fan Clutch Removal for Water Pump Replacement
Does anyone know what size fan clutch wrenches to get to remove the fan clutch on the '92 4.9L motor? I've been looking around and have found varying answers.
Thanks!
Thanks!
#2
Senior Member
The one I bought is 40mm & around $25, but it states 93 and up, so your 92 could go either way depending on when it came down the line. I've had some luck with things like that, just catching the edge of a flat with a big screwdriver or a chisel and smacking it counterclockwise a time or 2. assuming it is a right hand thread, which I believe they are. There is supposed to be a sticker under the hood alerting you if it is left hand thread.
anyhow here is the 93 up wrench.
anyhow here is the 93 up wrench.
#5
Senior Member
#6
Mark
iTrader: (1)
I used a big crescent wrench. wedged the pump with a long screwdriver.. tap the wrench with a hammer.. reverse threads
#7
Senior Member
Just sign out a spanner wrench from your auto parts store to hold in place while you loosen the fan clutch with an open end or large cresent wrench. Very easy and you don't have to go pounding on it to remove. It does have "left" hand threads. Some advice, replace the fan clutch and water pump together.
Last edited by raski; 07-16-2017 at 06:24 AM.