CHEAP LIFT KITS? HOME MADE or LEGIT.
#11
lost my Car again...
you don't have to tell me i just made 100 bucks from an old rusty door and deck lid off an old 1940s car
#12
Senior Member
Join Date: Aug 2011
Location: Omaha Nebraska
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
If yours is 4X4 then you can do what I did. Junkyard F250 front coils(U-pull-it for $20.00 bucks) and some 3 inch blocks. I bought my 3 inch body lift off craigslist for $40.00 dollars complete. Just a slight warning though. Your camber will be off and you will have install camber to get it right(that is a pain in the ---).
#14
Senior Member
This outfit either uses a rebuilder to reissue the state title or is a registered rebuilder. The southeast states have some of the most lenient rebuilt title requirements which probably explains why the family moved from New York to Florida state. Every vehicle I checked had issues on the title:
https://www.offleaseonly.com/
https://www.offleaseonly.com/
#15
I used to weld by trade many years ago so metal fabrication to me is easy. I dont recomend most to build their own lifts but as per the question...yes you could easily build your own lift / level kit if you know what you are doing.