96f150351w

I put a 2in leveling kit on with the stock shocks. I had no problems. I still have the spacers on with a 6in rc lift with there shocks and so for no problems.

N.F-150

Hello, my mounts actually cracked when removing the rad support to install the body lift. I ordered a set of inserts from jeffs bronco graveyard and welded those in.







Heres my old rad support completely rotted:

96f150351w

I'm replacing the core support when I do the body lift. Did u do anything to make the mounts stronger or anything like that?

N.F-150

yea I welded those hex circles in, but thats mostly because it was rotted and cracked. Other than that I did nothing. Those factory welds to the frame can support my own weight I tried jumping on the mounts lol.

96f150351w

Ok thanks. I'm not too sure if my frame mounts are rusted but I guess I'll find out when I get there lol. Thanks

eyesman2

I added the performance accessories kit 3" inch body lift..very easy install..i did by myself..very happy with the kit...it came with all the stuff you need...https://www.f150forum.com/f10/1994-f...estore-189589/...last pic is with everything installed

96f150351w

How was it getting the bolts off?

95shortbox4.9

You think I could tuck 33x12.5 on a 95 2wd?

96f150351w

Stock suspension and wheels? You'll rub. Look into getting a leveling kit. I have 2in coil spacers on the front of mine or a lot of people use them moog c824 or c844s to level it out.

warren561

Do you recall what the Ford Part Number was for this part?