billet grille
#3
Senior Member
Join Date: May 2007
Location: New England
Posts: 281
Likes: 0
Received 0 Likes
on
0 Posts
ohhhh I see now, i wonder, cuz I was looking at getting a billet to..hmhmh..maybe u just have to have skinny fingers or something ..good question..id love to see the answer..sorry I cant provide it
#4
'96 F150XL 4.9LI6/5sp.
Join Date: Jul 2007
Location: East Tennessee, USA
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
My '96 model came with a really nice billet grill. It has not got enough room to get your fingers back to the release either so I cut the bristles off of a toothbrush and use the handle to trip the release. The previous owner used a screw driver but I find the plastic handle to be safer on the billet finish. When not in use I store it in the dash.
#6
all you do is get a long wire, tie it to the emergency release at the bottom of the hook, tie a loop on the other end and run it along the top between the grille and the radiatior support so that when you pop the hood, you can reach in and grab it and pull it out to release the latch, vooallla, problem solved.
Trending Topics
#8
Love Ford or F*** Off
Join Date: Apr 2008
Location: Kansas City
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
#9
do you drill the hold through the release lever handle? I got one from LMC trucks and the directions that came with it make it look like you drill where the lever attaches to the latch mechanism it self and then somehow comes out the top of the shroud that is behind the grill. do you happen to have any pictures?