maierd2195

Does anyone know if I can take a 40/20/40 bench out of a 97-03 F150 and put it in my 93 F150? Would it require special mounting or anything like that? Has anyone done this and if so do you have pictures? Will a rear bench fit also from the same year range?

justinvanhandel

Bump

xedgex21

it would require drilling and probably bracket fabrication. Bolt holes aren't the same.

jsweet6479

I put 40/20/40 minus the 20 in my 94 but they were same generation. What you can do is take the brakets off the seats you have and put them on the new ones. I had a bench so I took the two brakets from it and two more from a junk yard. If you do it that way at least the outside holes will line up. Then just drill the rest. Make sure to put some kind of brace under the ones you drill so they won't rip out in a wreck. I used big a** washers.

superduty

I put 98 seats in my 98 bronco just need to drill 8 more holes make sure there straight though.

superduty

93 I meant