95 5.8 hesitation
#21
Senior Member
Check the emissions sticker under your hood to be sure, but timing should probably be 10* with spout removed.
This may sound off the wall, and I can't explain it. I replaced the RABS sensor on the rear diff today ($20 part and 2 minutes to change). It got rid of the initial hesitation in my truck.
This may sound off the wall, and I can't explain it. I replaced the RABS sensor on the rear diff today ($20 part and 2 minutes to change). It got rid of the initial hesitation in my truck.
#23
Senior Member
No promises - just telling you what happened on mine (and I don't understand anything about it!) From what I can tell, it supplies rear wheel speed into to the ABS system, but it must give some info to the ECM as well.
It's the Rear Anti-Lock Brake Sensor. It's mounted on the top of the rear differential. One wiring connector, one screw, pull it out.
http://www.partsamerica.com/ProductD...e=1061&PTSet=A
It's the Rear Anti-Lock Brake Sensor. It's mounted on the top of the rear differential. One wiring connector, one screw, pull it out.
http://www.partsamerica.com/ProductD...e=1061&PTSet=A
#24
Quantum mechanic
Thread Starter
Join Date: Nov 2008
Location: Wasilla, Alaska
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
Ok... I was reading this> https://www.f150forum.com/showthread...688#post145688 and had an epiphany.... well maybe... why does my IAC gasket only have one hole???
#26
Quantum mechanic
Thread Starter
Join Date: Nov 2008
Location: Wasilla, Alaska
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
Hallelujah *angels singing* Hallelujah
YEEEEHAW!!! got er fixed!!!
Turns out it was the coil, swapped one in off another truck and she's running like a top!
THANK YOU everyone for your advice and help on this. I now feel like I know EEC-IV intimately ...
Thanks again!
Now I can put the body lift and 33"s on it!!!
Turns out it was the coil, swapped one in off another truck and she's running like a top!
THANK YOU everyone for your advice and help on this. I now feel like I know EEC-IV intimately ...
Thanks again!
Now I can put the body lift and 33"s on it!!!