Topic Sponsor
1987 - 1996 F150 Still running strong! Talk about your 8th and 9th generation Ford F150 trucks.

'93 5.0L EFI starting problems

Thread Tools
 
Search this Thread
 
Old Dec 22, 2008 | 07:34 PM
  #1  
tscameron's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2008
Posts: 5
Likes: 0
Default '93 5.0L EFI starting problems

As mentioned above, I have a '93 5.0L EFI with starting problems. I ran it, and it started just fine, up until today. I had not run it in the last couple of days and the temperature has been pretty cold here (below 20 for the highs, single digit lows). Turning the key primes the pumps, the engine turns over (although I am running my battery down now), and it almost catches. I have read some places that it could be my air charge temperature sensor. Is this true? Also, I can't seem to locate it and have not found any diagrams that point me in the right direction. Unfortunately I am stranded at home and cannot get to a parts store unless I walk 3 miles (in about 40" of snow, some uphill, but not barefoot; the snow part is no joke). Before I head out I want to make certain I am getting everything I need to get it fixed as I don't really want to make the journey more than once. Anyone with any information is greatly appreciated.
Reply
Old Dec 22, 2008 | 07:41 PM
  #2  
wde3477's Avatar
Senior Member
15 Year Member
Liked
 
Joined: Jul 2007
Posts: 3,802
Likes: 477
From: Cape Girardeau MO
Default

Welcome to the site!

I suppose it could be the ACT sensor - although that wouldn't be my first suspicion.

Is there a possibility of fuel line icing? Do you have plenty of fuel rail pressure (there's a test port on the fuel rail)? Are you getting good spark?

Suggest to scrounge up a battery charger and get it going while you troubleshoot.
Reply
Old Dec 22, 2008 | 07:58 PM
  #3  
Good old Bill's Avatar
Senior Member
 
Joined: Feb 2008
Posts: 4,658
Likes: 28
From: Henderson, NV.
Default

Am remembering days long time past and engines almost catched but wouldn't. Naturally, I'm talking talking about carburated engines. But, perhaps its been flooded for what ever reason. First I would recommend turning the key on and off several times, just to prime the fuel rail. Can you hear the fuel pump when doing this? Attemp to start engine, if it continues to try to catch but won't, then put the accelerator all the way down, this turn off the injectors to clear a flooded engine.
Reply
Old Dec 22, 2008 | 09:08 PM
  #4  
tscameron's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2008
Posts: 5
Likes: 0
Default

Turned the key over several times to pump the fuel rail (I do hear it come on), have no way of testing the fuel rail pressure (still somewhat of a newbie with those things), and have pushed the accelerator to the floor to clear out the engine. Low and behold, it started. I am letting it run for a while and then will see if it starts tomorrow morning. It will be plugged in all night, so keep your fingers crossed! Thank you all so much.
Reply




All times are GMT -4. The time now is 03:29 AM.