4inch lift
#1
When in doubt, floor it
Thread Starter
Join Date: Dec 2007
Location: Minnesota
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
4inch lift
I was wondering...could i put a 4 inch lift and slap some 35's in there. I know there would be rub but is there any way you think i could probably get those things to fit?
#2
Senior Member
Where there's a will, there's a way.
I have plenty of clearance height-wise with 31s on stock height, so don't think that 35s with a 4" lift would be undoable. Wheel offset may help with rubbing on turns. Suggest to take some measurements and do some eye-balling before committing.
I have plenty of clearance height-wise with 31s on stock height, so don't think that 35s with a 4" lift would be undoable. Wheel offset may help with rubbing on turns. Suggest to take some measurements and do some eye-balling before committing.
#5
When in doubt, floor it
Thread Starter
Join Date: Dec 2007
Location: Minnesota
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
ive got a 4x4. I know a guy that has a 250...it was same height stock wise too. he put a 2.5 inch with 33x12.50 and he had no problem with rubbing. he even has the 460 too if that makes a difference. Same thing, 4x4 extended cab short box.
Trending Topics
#8
Ford Truck Lover
My '94 has 35" tires and I get no rubbing except on the sharpest turns. Not sure what lift is on it but it is probably more like 4" rather than 6".
#10
Ford Truck Lover