Hinzbilly

Has anyone installed a 38 Gallon Gas Tank into their trucks? I have a 95 F150 and wondering if I can put a 38 Gal Tank in it from Bronco Graveyard?

http://shop.broncograveyard.com/38-G...ctinfo/30330A/

Brandon587

far as I know you can, you just have to put your spare tire in the bed.

Brandon587

although it does say its for 80 to 84, im not sure what was diiferent then vs the 90s.

kd3pc

I bought a "new" 1984 Bronco with that tank, and the dealer could never get it to quit splitting the seams. Apparently the tank was too big, for the design. After three tanks, I finally agreed to a smaller one, and that lasted the next ten years until I sold it.

Not sure I would take the time to do it.

eyesman2

I use this site .....http://www.fullsizebronco.com/forum/index.php..along with this one i have always found the answers i need!

eyesman2

I have a 1994 f150 so for my year it's a 32 gallon tank.So if i have to replace my rear tank I will get the one from bronco grave yard..I dealt with them on my rear springs when i put on my lift kit..good quality.nice service

eyesman2

...fuel injection..pretty sure you can only get the 32 for 90's

Hinzbilly

Well I got a bronco just sitting that I'm taking the 351 out of. Was wondering if I could use the tank if it's good to have more fuel since I have a single tank.

eyesman2

If is a carb motor going into a fuely motor then possible no..fuelys have that stuff in the tank, just call the grave yard and ask,they helped me out a bunch. For my year 1994 302 fuely a bronco tank is almost a direct fit,you will need the tank supports and tank float/sender from a bronco but it can be done....if it's a carby that it is going into that's a beehive,but do what ya wanna do, if it is a fuely to fuely then a bronco will fit, same as carb to carb. but as far as i know a 38g carb tank will not work with a non or fuely truck,so you can get a 32g for a fuely with all the sending units...hope that makes sense

Brandon587

ah ok