aluminumpuppy

Right at 10 hours for the lift, Air tools were a huge help. make sure you have a few cutting wheels and a 4 1/2" grinder for trimming the frame to clear the bumper.
Everything was there except two 12mm locknuts for the mount bolts by the radiator and I had to cut a piece of hose to use as a guard since the lower radiator hose was real close to the steering gear.

Just remember that the kit works for long bed trucks too so there are a couple extra parts.

Relatively pretty easy, at least compared to my next mission which is to replace the front axle u-joints, TRE's, spindle/wheel bearings, ball joints and whatever else I break trying to replace that stuff...