Tyler.172

I want to put some 3/4ton leaf springs in place of my stock ones, if I get some from the same gen/ year truck will it fit with no fab work?

f150cam

since yours is 4x4, they will go right in. i know of 1 person who had to replace the hangers because the packs would contact them i think, but im not 100% sure about that iv never heard of that happening before.

Tyler.172

ok cool thanks! ill take some measurements of everything and go from there!

snipe1605

Yeah they will bolt right up, if you get 3/4 springs from JBG then you will need to replace the front hanger or replace the front bushing on the leaf pack as its wider.

Tyler.172

ok sweet thanks! does anyone know if I find a receiver hitch from a 3/4 ton or 1ton would that work on my truck? im still gunna measure it all but just curious

f150cam

yes it will.

Tyler.172

awesome! that's what I was hoping to hear!

f150cam

frame wise 150-350s are ALMOST the same. only slight changes in the frame horns.

Tyler.172

ok sweet I think I know the answer to this question but the trucks that have a 10in drop down bumper (or whatever its called) and have a receiver hitch that would hang low on my truck right? I just have a regular bumper on the rear

snipe1605

Not sure what you mean by your question, but you can buy hitchs that drop down 10 inches or just custom build one.. As far as a rear bumber hanging 10 inches lower than the truck would look pretty stupid immo.