You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
right now I have 2" body with t-bar crank running 35" tire, I do have a little rub on the front valence but its a mater of cutting it. you can run 35s with stock rim, 33s are safe but I think they look a bit to small
the stock torsion keys are turned up to level it out. It had Bilstein HD shocks on it when i got it. And it has 285/70-17's i believe (about a 33" tire) Federal Couragias, on Fuel Hostages 17x9 -12mm offset, 4.5" backspacing
if you want bigger tires gotts mod is bad because it lowers your low end torque and increases high end torque. with big tires you need low end torque in order to take off. gas mileage will suffer due to this
its actually stock suspension. i just have the torsion bars turned to level it out. the tires are 285/65/18 roughly 33" by 12". they are seriously the biggest i could go without cutting or trimming anything