kirschbaumr

Yes they are, factory sizes for front and back on 09 and up are 6x8. A lot of speaker manufacturers are now making the speakers in 5x7/6x8 (both of the infinitys I tried were the 5x7/6x8) they fit like a glove, no trimming etc. As far as good investment... worth every penny as far as the infinity kappa 6829s go (75 a pair on amazon) plus you will not need the plug and play harnesses. They have an outboard crossover which you can just take some industrial strength velcro and mount it to the door frame (MAKE SURE YOU PUT YOUR WINDOWS ALL THE WAY DOWN DURING INSTALL) I didn't, and when I rolled them I gutted my wire job because where I mounted them originally interfered. Easy factor: very. I can even shoot you a video of how to remove the door since I need to get back in there because I forgot something......

thanx man. i used to have regular boards but kept seeing people with these and really liked them. im glad i made the switch

Thanks for the information! I got them swapped out and the ecobeast is looking much better. I have recon headlights, front grille intercooler cover ordered, and blacking a few other things out this wknd. After that my level and tires are going to be the big investment..ugh!

Thank you! Here are the part numbers for the black reflectors;

right mirror # 9L3Z17E748AA
left mirror # 9L3Z17E749AA

I picked up the black replacement reflectors at my local Ford dealership for around $25, you can go to Tasca parts and probably find them cheaper. To replace the reflector just stick a small screwdriver into the slit area between the mirror housing and the reflector on the clip side and push the clip in slightly and slide it out. The reflector will bend a little bit and then pop right out. The black replacement plastic pops right back in. Takes no more than 30 seconds total for each side to pop out and put the replacements in.