Hi there, my name is Ted Griffin, I am in Phoenix AZ. I have been lookiing at your post about the 4r70w swap to 4r100. My truck is a stock 4x4 5,4 liter with the 4r70w. I put a harley davidson supercharger setup on it along with engine wiring harness. I am having issue with the tranny now and was wondering if you have time for a few questions. Any help would be appreciated.
Can you give me the run down on how you used 2500hd Torsion bars on your Truck and if it would be the same process for my Supercrew? If the 2500hd TBs work, would a custom set of sawaway TB's work as well? Thanks!
Hey do you have any idea where I can find an older alpine cde 7893/94 head unit? OR one similar with the same bass engine and built in amp? I have been checking ebay but can only seem to find the faceplates. Any help would be appreciated.
I was told my intake manifold was cracked, well, I have a feeling it is just the gasket, it is actually bubbling up from a temp sensor, ( I may be wrong about the part) well I took the fuel rail off and removed the little part over the leak and inspected it and saw no signs of a crack, but it did look like there was a little too much of a gap down into the hole on the sides, could the gasket blow without cracking the manifold?
Hey ! i know you really know what your doing with electrical stuff so, my brother had a neon kit that he never installed so, do you think i could be able to wire(12v) the neon when the doors open and closed ? i dont want any switch...