Especial86

Hey brother! Any pics of a "sandwich plug" you were mentioning earlier? I tried to find it and I couldn't find s**t. Gotta do a tranny service this summer. Thanks!

Not a problem. Yeah I just trimmed it the other day with a cutting wheel. I didnt even think of that but that should work as well. You will love the tires if you get them. I will take a pic tomorrow and post it so you can see.

Hows it going? I have 295/65/20 (35.1x11.6) Nitto Trail Grapplers on 20x9 +12mm offset Black Rhino Rockwell wheels. When I just had my stock 20" Ford wheels they rubbed the upper control arm and the frame. So I just got the Black Rhino wheels and it eliminated the rubbing on those components but still rubbed the lower valence which I easily trimmed to fit with a razor blade. They also rub the inner wheel fender when I go in reverse but its nothing major and am going to take care of that by cutting out the section where it rubs in a couple days. Its only on the bottom of the inner fender about a 4" x 6" section.

No worries! I figured something between us wasn't adding up, turns out we were on entirely different pages, or, in entirely different countries I should say. T'was fun though, nothing wrong with a good ole' debate every now and then. Best of luck in America.