dan222

Thanks again Dan! I compared your part number against mine and it matches. When I spoke with the service manager he's going to order another set and see if there might be something wrong with mine. It's just weird because the fronts fit perfectly and the rears are deciding to be a pain. I really appreciate all your help! Thanks again!

Thanks for the update. I believe from your one picture I noticed the bottom inside was about a 1/4" off and not flush with the inside molding (by the bar and facing the tire). This could possibly explain my issue and I'm going to tinker with it later to see it a slight adjustment could get things in line. I wish I didn't run into issues uploading additional pictures because you could see the issue with my flaps. Thanks again for everything!

Thanks Dan! Appreciate the help...do you remember if you had to use a hot air gun to get the backs to not dog ear outwards or did yours just fit that nicely from the start once you got the screw issue worked out? Just curious because your rear mudflaps look great and the dealer said they might have to mold them a little to get them to fit correctly. I really appreciate the help....John

I didn't notice you had pictures posted of your mudflaps until after I submitted the post on the mudflap thread. Your rear mudflaps are flush to your fender trim, unlike mine. Do you remember the part number of your rear mudflaps? Just curious to see if mine might be the wrong part number. Thanks for your help!