You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Thanks for the response. I am trying to decide between purchasing a tan 2010/11 console with the correct mounts (that I would have to paint) or an 04-08 one that I would have to modify to fit (drill holes). Tough choice. Especially since it looks like the 04-08 gray color is different than the 10/11's.
bskouby - Yes those are the colors I used. Sorry, I cannot verify the numbers, I am at work. The trick I feel to a quality job is in total disassembly of the unit. Most of it just pops apart with some areas being screwed together. I followed the instructions on the can for prep. I pre-washed with a good detergent, then used there recommended prep product and then sprayed multiple light coats and let dry for a day prior to reassembly. A key this time of year depending on where you are located is to do this in a warm dry place. A far as durability, it has held up well so far. I do not believe flaking off would be an issue. Good luck.