Big Bob

Ya bro no problem, I know if I can fit these on mine then you should be ok. Ill get the pics up asap, should be on monday.

ya i got the 2'' spacer ill have to go back and spueeze it in and get a 5" block .is it ok to throw a 5" block in there because i know pro comp gots em'

so it is possible to put the level spacer on the 6'' basic because i tried and couldnt get the strut under a arm but ill give it another try some time because need more clearance

hey i checkin out ur truck and was wondering if it was possible to put my leveling spacer on my lift spacer and get a bigger block for the rear

my coil overs are as low as they will go and everything fits fine. I Did trim the plastic just a bit cause when i went over hard bumps it rubbed. the wheels are 20x9 with 5.03 backspacing and offset -12mm. everyone and there brother told me they wouldn't fit but they did. Any others questions just hit me up.

The offset on mine is a -44. So on a 12" wide rim, the backpacing is about 4.7"

oh ok. what did you do to get a 7.5" lift? ive been wanting to do that. oh and my rims are 10 inches wide. they offset alot tho, im not sure how much.

im pretty sure my rims are 12.5 inches wide and im not sure about the offset. they are 18 inches in diameter tho, 22's are a little big for a truck thats only lifted like 6 inches

22X10s the tires are Kumhos 37X13.5. I needed every bit of that lift to fit them too. What kind of lift are you running. The Rize kit I have is a 8in supension lift.

It may be Friday before I can find out for sure what he's running. He started with a 6" Fabtech lift plus whatever else he added. Those are 24" XD's with 36 or 37" Toyo's. He had 4.10 gear's with a Edge programmer last time I checked. He also did the custom exhaust with the cool side exit pipes. He work's at an off road shop close to my house that does lift's on truck's and atv's. He also has a 2010 Can Am 800 lifted on 31's and snorkeled. The place is the local hangout for off roader's.