What seats can I swap out in my 91 f150
#6
I think you might be able to use a newer superduty rear bench as a front seat but not 100% and new front seat will be too wide. I had a set of 03 superduty seats in a 88 and they fit but not the best
#7
So I have replaced the front bucket seats in my '91 F150 4x4 ext cab. You can get new brackets that bolt in at: http://wedgebrackets.com/ford-pickup...-brackets.html and then the seats I used were from Jegs. Looks really good.
Trending Topics
#8
Hi, I am new to the forum. This is my first post.
I've got a 1993 stock supercab xl 4.9l i6 that I bought as my third OBD truck recently. I just bought some swank vinyl front and rear seats in great condition for $125. The problem I'm having is that the guy that sold them to me neglected to tell me until I got them home and realized the rear seat bracket is slightly off that the seats were out of a 1995 f250 super cab. My being the too eager dumbass I sometimes am, I neglected to take measurements to ensure fitment. The rear seat back does not line up at all with the factory bolt holes.
I went to a junkyard to inspect seat brackets for the rear seat on a 250 and surprise, already pulled from all 4.
I know I can probably Jimmy the seat back in there with wood, or maybe even better would be metal, but I want the truck to look clean and also be safe for rear passengers also. Anyone found a compatibility fix for this? Or, can anyone direct me to a thread where this is discussed?
Thanks!
I've got a 1993 stock supercab xl 4.9l i6 that I bought as my third OBD truck recently. I just bought some swank vinyl front and rear seats in great condition for $125. The problem I'm having is that the guy that sold them to me neglected to tell me until I got them home and realized the rear seat bracket is slightly off that the seats were out of a 1995 f250 super cab. My being the too eager dumbass I sometimes am, I neglected to take measurements to ensure fitment. The rear seat back does not line up at all with the factory bolt holes.
I went to a junkyard to inspect seat brackets for the rear seat on a 250 and surprise, already pulled from all 4.
I know I can probably Jimmy the seat back in there with wood, or maybe even better would be metal, but I want the truck to look clean and also be safe for rear passengers also. Anyone found a compatibility fix for this? Or, can anyone direct me to a thread where this is discussed?
Thanks!