95 Auto Trans, not shifting
04-29-2014, 12:39 PM
#1
Junior Member
Thread Starter
Join Date: Apr 2014
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
95 Auto Trans, not shifting
About truck. Has edelbrock heads and intake, Lunati cam. Mas air conversion. Lifted 4x4.
Issue...
No reverse lights, no od light, only has 2nd, 3rd and reverse. Neutral and park work. Does not up our down shift. Codes are 15, 34, 67, 85.
Any help would be great!
Issue...
No reverse lights, no od light, only has 2nd, 3rd and reverse. Neutral and park work. Does not up our down shift. Codes are 15, 34, 67, 85.
Any help would be great!
05-01-2014, 08:22 AM
#3
(O)
No Keep Alive Memory power to PCM pin 1 or bad PCM (Memory Test Failure)
34
(R)
EVP – EGR did not respond properly during test – EVP
67
Park/Neutral circuit fault – PNP
85
2 3L T/C Automatic – 3/4-4/3 Shift solenoid – Transmissions
05-04-2014, 01:57 PM
#4
Junior Member
Thread Starter
Join Date: Apr 2014
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Looks like i have another issue. An a9p computer was installed for mass air conversion. Does the original computer control shifting? If computer is the issue, what one should i use that is mass air and will work with e4od
06-08-2014, 10:26 AM
#5
Junior Member
Join Date: Jun 2014
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
hello ford brothers/sisters im in procsess changing 5 speep 4.9 too a aod/w metric my manual setup in 1993 from factory doesant have all plugs im getting automatic colum this Tuesday what all wireing do I need and will I have too change competer
06-09-2014, 07:22 AM
#6
Junior Member
Thread Starter
Join Date: Apr 2014
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Well. Found the issue. The computer they used for mass air conversion and wiring was a mustangs setup and won't work the e4od. Bought the right conversion kit from fiveologyracing.com. Runs like a dream
