Interior Mod Ideas
10-30-2015, 07:10 AM
#281
Senior Member
Thread Starter
The following users liked this post:
Jtwilliams (10-31-2015)
08-23-2016, 04:03 AM
#283
Member
See my photo of faux leather snake skin headliner and visors somewhere in this forum. Maybe the flareside thread or in my profile. Bought the faux fabric on eBay for a bargain and is very high quality. The headliner is boa and one side of visors is python and other boa. The ugly tan fiberglass showing on the underside of my snug top is now covered with a shiny silvery pyton (or boa) faux leather wrap. It reflects beautifully off the plum paint color in the noon day Arizona summer sun. Also installed daytime running lights, floorboard horn left side, Viper keyless entry/alarm, backup beeper to rear bumper, super-duper detail in cab as previous owner smoked his cigars in the truck. ALso Owens gloss black running boards reinforced with steel brackets to frame for needed stability and strength. Check out Plum Tuckered Out (Tucker) on this forum. Kept the jumpseat for my customized console cup holder and the passenger is my big 30 yrs old teddy bear named Streamline.
08-13-2017, 11:27 AM
#286
Senior Member
Thread Starter
See my photo of faux leather snake skin headliner and visors somewhere in this forum. Maybe the flareside thread or in my profile. Bought the faux fabric on eBay for a bargain and is very high quality. The headliner is boa and one side of visors is python and other boa. The ugly tan fiberglass showing on the underside of my snug top is now covered with a shiny silvery pyton (or boa) faux leather wrap. It reflects beautifully off the plum paint color in the noon day Arizona summer sun. Also installed daytime running lights, floorboard horn left side, Viper keyless entry/alarm, backup beeper to rear bumper, super-duper detail in cab as previous owner smoked his cigars in the truck. ALso Owens gloss black running boards reinforced with steel brackets to frame for needed stability and strength. Check out Plum Tuckered Out (Tucker) on this forum. Kept the jumpseat for my customized console cup holder and the passenger is my big 30 yrs old teddy bear named Streamline.
08-14-2017, 08:39 PM
#287
Senior Member
Thread Starter
So I feel dumb now that I figured out how to remove that jump seat consol lid.... just remove the rubber hing cover, at the side you will see where a pin is that is the actual hing. Sick a screwdriver in, gently twist and it will push inward forwards the center.... boom done. It's out after both are done
05-12-2018, 09:38 AM
#289
Senior Member
Thread Starter
I found a little module made by revolution electronics that fades your interior lights on when you open your door, fades them off when you shut the doors. If ignition power is on, the lights fade out immediately when you shut the doors. If ignition power is on and you turn it off (shutting off the truck) the lights fade on. With ignition power off, the lights stay on inside for 10 seconds or so before fading off. Cool little mod that I added to the truck last weekend.
05-12-2018, 09:39 AM
#290
Senior Member
Thread Starter
And also, I have began sound deadening the truck. I have only done my doors using vibration dampening materials, closed cell foam, and mass loaded vynle. But just the doors have made a nice improvement. I will get to doing the entire truck in sections.
