ericantonio

95 f150, 5.0 2wd,

Yep, changed all my door panel clips and the driver's side door is SOL. All the screws are done for. Tried using some silicon I had in the glove box and see what happens after a day. NOPE. Nada.

What have you guys been doing? I *may* know someone with a welding tool. Any thing else will work?

ericantonio

I'm wonder if the following will work:

Piece of sheet metal with 3 holes in it. Kinda looks like a popsicle stick. 1/3 from top will be the bolt that is used for the innards. Then 1 hole on each end to bolt onto the flimsy sheet metal on the underside. Think that'll work?

ericantonio

Google to the rescue!! I'll look around for a square piece of metal and drill a hole. Then maybe JB Weld it on the underside of the thin metal so when I pull, it'll pull on the original metal part. When I looked in the other day (darn, I put brand new panel clips on it too) it looked to be all jagged and thin so probably need a lot more support.

FYI, panel clips on amazon $5.00 a bag of 25.

With pictures!

https://www.f150forum.com/f10/door-h...ailure-286048/